Greenlee NC-100 Instruction Manual download pdf (Page 10)

Tracing Tone Mode

This function provides a means of tracking cables by generating one of three distinct

selectable tones on a specific wire, pair, or all pairs. The cable can be traced using a

tracing probe that is capable of detecting tones ranging from 577 Hz to 983 Hz.

The three available tones are as follows:

• HiLo1 – Fast Warble

• HiLo2 – Medium Warble

• HiLo3 – Slow Warble

To select the relevant Tracing Tone mode, first select the cable type by switching the

unit on in Network, Telephone, or Coaxial mode. Then press Tone to activate the tracing

tones. Repeated quick presses of Tone will allow you to select which wires or pairs are

carrying the tone depending upon mode. A long press of Tone (more than 2 seconds)

will select the next type of tone, “HiLo1”, “HiLo2” or “HiLo3”.

This screen shows, for example,

that all wires of a network cable are

carrying the “HiLo1” tone.

In this screen only wire “3” of the

telephone cable is carrying the

“HiLo2” tone.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

No comments

Greenlee NC-100 Instruction Manual Page 10